GE Fanuc IC693APU300D High-Speed Counter Module

The GE IC693APU300D is a high-speed counter module for the GE Fanuc Series 90-30 Programmable Logic Controller (PLC) system. It is used to count events that occur at high speeds, such as revolutions of a motor, pulses from an encoder, or cycles of a timer.

Here are some of the key features of the GE IC693APU300D:

High-speed counting: The module can count events up to 1 MHz from external devices and up to 2 MHz using its internal oscillator.
Multiple counting modes: The module supports a variety of counting modes, including up/down counting, quadrature counting, and frequency measurement.
Windowing: The module allows you to define a range of counter values where the strobe input is recognized as a valid input. This can be used to filter out unwanted events.
Configurable outputs: The module has two configurable outputs that can be used to trigger other devices or events.
Rollover detection: The module can detect when the counter value rolls over from its maximum value to its minimum value.

Here are some additional details about the GE IC693APU300D:

Number of channels: 2 channels
Input voltage: 5 VDC to 24 VDC
Output voltage: 5 VDC to 24 VDC
Operating temperature: -40 to 85 degrees Celsius
Dimensions: 2.0" x 6.0" x 5.0" (5.1 cm x 15.2 cm x 12.7 cm)

The GE IS200 is a family of printed circuit boards (PCBs) used in GE Mark VI turbine control systems. The IS200 family includes a variety of boards, each with a specific function. Some of the most common IS200 boards include:

• IS200DSPXH2: This board is a digital signal processor (DSP) that provides the Mark VI system with its processing power.
• IS200DTTCH1A: This board is a turbine control unit (TCU) that interfaces with the turbine and controls its operation.
• IS200ESYSH3A: This board is a high-speed serial link interface board that provides communication between the Mark VI system and other devices.
• IS200ECTBG1A: This board is an exciter terminal card that provides input and output signals for the exciter.

The GE IS200 family of PCBs is designed to be highly reliable and to provide years of trouble-free operation. The boards are also designed to be easy to maintain, with modular construction that makes it easy to replace individual components.

Our Other Products Include